Updated Nov 17, 2026· 6 min read

Key takeaways

  • A single-speed 12-volt tongue jack in the 3,500-4,500 pound lift-capacity range suits most travel trailers and smaller campers, while a heavier-duty jack…

A single-speed 12-volt tongue jack in the 3,500-4,500 pound lift-capacity range suits most travel trailers and smaller campers, while a heavier-duty jack rated above 5,000 pounds suits larger fifth-wheels and bigger toy haulers that carry more tongue weight. Buyers who hitch and unhitch frequently at different sites generally benefit most from a jack with a wireless remote, since it removes the need to stand at the trailer’s front to operate the switch.

How a 12-volt electric trailer jack works

An electric tongue jack replaces the manual crank handle on a trailer’s A-frame with a 12-volt motor that raises and lowers the trailer’s front end at the push of a button, drawing power from the trailer’s battery or a connected tow vehicle. Most units mount in the same location as a manual jack, using a similar foot plate or pad at the base, and many include a built-in LED light to help with hookups in low light. A manual crank handle is usually still included as a backup in case the motor fails or the battery is dead.

Lift capacity, measured in pounds, indicates the maximum tongue weight the jack can safely raise and lower; this is separate from the trailer’s total weight, since tongue weight is typically only 10-15 percent of a loaded trailer’s full weight. The maker’s listing should state both the lift capacity and the jack’s travel distance, which is how far the leg extends from fully retracted to fully extended.

Who each tier suits

Owners of smaller travel trailers and pop-up campers are generally well matched to a standard-duty jack rated around 3,500 pounds, which covers typical tongue weights for that trailer class without adding unnecessary cost or bulk. Mid-size travel trailers and smaller fifth-wheels usually call for a jack in the 4,500-5,000 pound range, giving some margin above the trailer’s stated tongue weight. Larger fifth-wheels, toy haulers, and heavily loaded trailers need a heavy-duty jack rated above 5,000 pounds, and some manufacturers offer dual-motor or higher-torque versions specifically for these heavier applications.

Buyers who back into tight campsites alone, without a second person to guide the hookup, often benefit from a jack with a wireless remote or a corner-mounted control pad, since it allows adjustments from a position where the hitch is visible.

What to check before buying

  • Lift capacity versus tongue weight: Confirm the trailer’s actual tongue weight, usually on its data plate or in its owner’s manual, and choose a jack rated above that figure for a safety margin.
  • Travel distance: Check how far the jack leg extends and retracts; a jack with too little travel distance may not reach level ground on uneven sites.
  • Mounting dimensions: A-frame tube size and existing bolt pattern vary by trailer brand, so confirming the jack’s mounting bracket matches the trailer’s frame avoids a difficult installation.
  • Power draw and wiring: Electric jacks draw meaningful current under load; verify the trailer’s wiring and breaker can support the jack’s stated amperage, and whether a dedicated circuit is recommended.
  • Manual override: Confirm the jack includes a manual crank or handle for use if the motor or battery fails, since a jack with no manual backup can leave a trailer stuck in one position.
  • Weather sealing: Since the jack sits low and is exposed to road spray, mud, and standing water, a stated weatherproof or sealed motor housing matters for long-term reliability.
  • Control options: Compare a basic rocker switch, a wired remote, and a wireless key-fob style remote, since each changes how convenient hookups are, especially solo.

At a glance

Tier Best for Key stated specs Limits
Standard-duty Small travel trailers, pop-up campers ~3,500 lb lift capacity, basic rocker switch, manual crank backup Not rated for heavier fifth-wheels or loaded toy haulers
Mid-duty Mid-size travel trailers, small fifth-wheels 4,500-5,000 lb lift capacity, LED light, wired remote option Higher cost than standard-duty units
Heavy-duty Large fifth-wheels, toy haulers, heavier tongue loads 5,000+ lb lift capacity, reinforced leg, higher-torque motor Larger size and weight; higher current draw
Remote-equipped models (any tier) Solo campers, frequent hookup/unhookup Wireless remote or key-fob control, LED indicator light Remote battery needs periodic replacement

Fit and compatibility notes

Before ordering, measure the A-frame tube where the current jack mounts, since electric jacks are sold for specific tube widths and bolt patterns, and an incorrect size can require frame modification. Trailers originally built with a manual jack may need an upgraded wiring harness and a dedicated fused circuit to handle the higher current an electric motor draws, so checking the trailer’s existing wiring gauge against the jack’s stated amperage is worth doing before installation. Ground clearance at the jack’s fully retracted height should also be checked against the trailer’s travel height, particularly for off-road or overlanding trailers that need extra clearance. Always follow the manufacturer’s installation manual for torque specifications on mounting bolts and for the recommended wiring gauge and fuse size.

Pick this if…

If you… Choose…
Own a small travel trailer or pop-up camper A standard-duty jack around 3,500 lb capacity
Own a mid-size travel trailer or small fifth-wheel A mid-duty jack in the 4,500-5,000 lb range
Own a large fifth-wheel or toy hauler A heavy-duty jack rated above 5,000 lb
Hook up and unhook solo at different campsites Any tier with a wireless remote control
Want a backup in case of motor or battery failure Any jack that explicitly includes a manual crank handle

Alternatives worth considering

A manual crank tongue jack remains the simplest and most failure-resistant option for buyers who don’t mind the physical effort of cranking, and it avoids any wiring or battery dependency entirely. A set of stabilizer-only scissor jacks, used alongside the existing tongue jack, can help level a parked trailer without replacing the tongue jack itself, though these are not a substitute for raising and lowering the hitch during hookup. For trailers that already have a working manual jack, a simple powered drill attachment designed for crank jacks offers a middle-ground upgrade that speeds up cranking without the cost or wiring of a full electric jack replacement.

Frequently Asked Questions

Can I install an electric trailer jack myself?

Many electric tongue jacks are designed as a bolt-on replacement for a manual jack and can be installed with basic tools if the mounting dimensions match. Wiring the jack into the trailer’s 12-volt system may require some electrical work, and anyone unfamiliar with trailer wiring should follow the manufacturer’s manual closely or have an electrician or RV technician assist.

What happens if the jack’s motor fails while the trailer is hitched?

Most electric tongue jacks include a manual crank handle specifically for this situation, allowing the trailer to be raised or lowered by hand if the motor or battery fails. Confirm this feature is present before buying, since not every model includes it.

Do electric trailer jacks drain the battery quickly?

A tongue jack only draws significant current while actively raising or lowering, not while idle, so normal use has a limited impact on battery charge. Repeated use without recharging, or a weak battery to begin with, can still leave less power available for other trailer systems.

How do I know my trailer’s tongue weight?

The trailer’s data plate, usually near the hitch or inside a storage compartment, often lists the tongue weight, or it can be measured directly with a tongue weight scale. This figure should always be compared against the jack’s rated lift capacity before buying.

Can an electric jack be used on uneven or soft ground?

Electric jacks generally function the same on uneven ground as manual ones, but a stable footing, such as a jack pad or block, is recommended on soft or sandy ground to prevent sinking under load. Follow the manufacturer’s guidance on ground support accessories if camping regularly on soft surfaces.

Is a wireless remote reliable in all weather?

Most wireless remotes for trailer jacks are built to handle normal outdoor conditions, but extreme cold can reduce remote battery performance temporarily. Keeping a spare battery for the remote and confirming the wired rocker switch still works as a backup is a reasonable precaution.

A
Agendewiqq Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.