Updated Nov 20, 2026· 8 min read

Key takeaways

  • Silicone, stainless steel and carbon fiber license plate frames for cars, SUVs and trucks compared, with fit, hole spacing and plate visibility notes.

A license plate frame looks tiny, yet it does several jobs at once. It keeps the plate from rattling, shields the edges from scrapes, and gives a car, SUV or truck a cleaner finish. The wrong frame, though, can cover part of the plate, trap water behind it, or fade and crack within a year. This guide compares five Amazon frames in flexible silicone, stainless steel and real carbon fiber, so you can match the material to how your vehicle is used.

Every frame below fits the standard United States plate size of 12 by 6 inches, but the details differ: some are single frames, some come in pairs, and the hardware ranges from plain screws to matching screw caps. Each pick leaves the plate numbers, letters, state name and renewal stickers fully visible. Frame rules vary from place to place, so check your local requirements before fitting any frame.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most drivers, a silicone frame such as the Rightcar Solutions or the Aujen two pack is the easy pick: it will not rust, it cushions the plate against rattles, and it cannot scratch paint. Drivers who prefer metal should look at the QUANQIUFEI stainless steel pair, while the BLVD-LPF frame suits anyone who wants genuine carbon fiber.

How to choose

Begin with material. Silicone frames flex, so they forgive minor knocks, never rust, and press softly against paintwork. Stainless steel frames are rigid and keep a crisp edge for years, with finishes from matte black to mirror polish. Real carbon fiber is very light and highly decorative, and it sits at the premium end of the group.

Next, count your plates. Some states issue two plates and some only one, so decide on a single frame or a pair before choosing a pack size. Then check the mounting. Frames come in two hole and four hole layouts, and the hole spacing must match your bumper or bracket; the spacing is printed on each listing, so compare it with your vehicle.

Border width matters for legality. A slim border keeps the state name and renewal stickers uncovered, as most local rules demand, while a wide border can hide what officials need to read. Finally, consider the extras. Screw caps hide the hardware for a cleaner finish, drainage holes keep water from pooling behind the plate, and a clear coat over carbon fiber helps the gloss survive strong sun.

Rightcar Solutions Silicone License Plate Frame

Check price on Amazon

Rightcar Solutions built its name on this single silicone frame, the benchmark for the flexible style. The frame is molded from premium grade silicone, so it bends around the plate instead of fighting it, and the soft edge sits between the plate and the bumper. That cushion quiets the buzzing many drivers hear from a bare plate at highway speed. Because silicone does not rust, the frame suits vehicles that live outdoors in wet or salty climates, and the open border leaves every number, letter and sticker in full view. Drainage holes along the bottom edge let water escape rather than pool behind the plate. Fitting is a simple screw-on job using the existing plate screws, and the frame can go on the front or the rear of a car, SUV or truck with standard plate mounts. If you only need to dress one plate, this is the cleanest way to do it.

Specs:
– Brand: Rightcar Solutions
– Material: Silicone
– Model: R9901
– Frame size: 12.28 x 6.3 inches
– Fits: Standard US plates, 12 x 6 inches
– Color: Black
– Pack size: 1 frame

Aujen Silicone License Plate Frames 2 Pack

Check price on Amazon

The Aujen pack covers both plates on a vehicle in one purchase, which makes it the natural pick for a new registration or for replacing a tired front and rear set together. The frames are molded from high quality silicone with the same goals as the Rightcar design: no rust, no rattles and no paint damage where the frame touches the bumper. Drainage holes in the lower edge give rain and wash water a way out, and the flexible body pulls snugly over the plate so the border stays open and the registration stickers stay visible. The soft frame also tolerates the flex and vibration of larger SUV and truck tailgates without cracking the way rigid plastic can. Installation uses the plate screws already on the vehicle, and the pair arrives ready for front and rear duty. For households with one vehicle and two plates, this two pack is the simplest route to a matched, tidy look at both ends.

Specs:
– Brand: Aujen
– Material: Silicone
– Pack size: 2 frames
– Color: Black
– Fits: Standard US license plates
– Features: Drainage holes, rust proof and rattle proof design

QUANQIUFEI Stainless Steel License Plate Frames 2 Pack

Check price on Amazon

Drivers who want the weight and shine of metal should look at this QUANQIUFEI pair. Each frame is stainless steel with a black finish, so it brings a firmer, more rigid hold than silicone while still resisting rust through wet winters and car washes. The pack includes two frames for front and rear plates, plus screw caps that hide the mounting hardware for a neater finish. The border is kept slim, which matters for legality: the numbers, state name and renewal stickers remain uncovered, though you should still confirm the rules where you live before fitting any frame. Stainless steel will not flex like silicone, so line the frame up squarely before the final tightening, and check that your mounting holes match the spacing on the frame as listed.

Specs:
– Brand: QUANQIUFEI
– Material: Stainless steel
– Finish: Black
– Pack size: 2 frames
– Included: Screw caps
– Fits: Standard US license plates

BLVD-LPF Real Carbon Fiber License Plate Frame

Check price on Amazon

Most carbon look frames are plastic with a printed weave. This BLVD-LPF frame is the genuine article: real carbon fiber under a glossy clear coat, made by Boulevard Los Angeles. The listing notes a UV protection clear coat over the fiber, which helps the deep gloss finish hold up in strong sun. The weave catches the light in a way no printed pattern matches, so it suits sports cars and performance trims where the weave will be seen. It is sold as a single frame, so plan on the rear plate for the full effect, or order two if both ends need to match. Carbon fiber is light yet stiff, and the frame mounts with standard plate hardware. As with every pick here, the border leaves the plate fully readable, but local rules vary, so check the requirements where you live before fitting.

Specs:
– Brand: BLVD-LPF OBEY YOUR LUXURY
– Material: Real carbon fiber
– Finish: Glossy black, UV protection clear coat
– Manufacturer: Boulevard Los Angeles Inc.
– Part number: LF6-D4P-E7A-PRNT
– Pack size: 1 frame

LFPartS Polished Stainless Steel License Plate Frame

Check price on Amazon

The LFPartS frame is the traditional choice in this group: a slim, two hole frame cut from 304 stainless steel and polished to a mirror chrome finish. Where the QUANQIUFEI pair goes matte and dark, this one goes bright, which suits chrome trimmed cars and classic trucks that already carry plenty of polished metal. The maker states the 304 grade steel will not rust or corrode, and the slim profile keeps the border narrow so the plate stays fully visible, state name and stickers included. The two hole layout matches the top mounting points used on many US vehicles; if your bumper uses four screws, confirm the hole spacing shown on the listing before ordering. It is sold as a single frame and ships from Amazon, which makes it an easy addition when only one plate needs attention.

Specs:
– Brand: LFPartS
– Material: 304 stainless steel
– Style: 2 hole, slim
– Finish: Polished mirror chrome
– UPC: 087169783678
– Pack size: 1 frame

Who should skip

Skip this entire category if your local rules ban plate frames or covers outright; a few places restrict anything around the plate, and no frame is worth a fine. If your area requires fully exposed renewal stickers in a specific corner, double check border coverage before choosing a wide frame. If your vehicle uses a non standard plate size, such as a motorcycle or a trailer plate, none of these frames will fit, since all five are built for the standard 12 by 6 inch US car plate. And if your mounting holes are damaged or missing, sort the mounting point first: no frame can hold a plate on a broken bracket.

FAQ

There is no single national rule. Many places allow frames as long as the numbers, letters, state name and renewal stickers stay fully visible, while a few places restrict frames or ban plate covers entirely. Choose a slim border frame like the ones above, and check your local vehicle code or motor vehicle office before fitting it.

Will one of these frames fit my SUV or truck?

Very likely, yes. Cars, SUVs and trucks in the United States share the same standard plate size of 12 by 6 inches, and all five frames here are built for that size. What can differ is the mounting: check whether your vehicle uses two or four screws and compare the hole spacing with the listing before you order.

Silicone or metal, which should I choose?

Pick silicone if the vehicle lives outdoors, sees road salt, or has a plate that rattles; it cannot rust and it cushions the plate against the bumper. Pick stainless steel if you prefer a rigid frame and a metal finish, and choose real carbon fiber if the woven look matters most to you.

Can a frame stop my plate from rattling?

A snug frame helps, and silicone helps most because the soft material presses gently against both the plate and the bumper. Make sure the screws are firmly tightened and the plate sits flat inside the frame. If the noise continues, the cause may be a loose bracket rather than the plate itself, and that bracket should be repaired first.

Final verdict

For most cars, SUVs and trucks, the Aujen two pack is the easiest recommendation: two silicone frames, no rust, no rattles, and a matched look front and rear. The Rightcar Solutions frame is the better buy when only one plate needs a frame. Drivers set on metal can choose between the black QUANQIUFEI stainless pair and the polished LFPartS frame, depending on the trim already on the vehicle. And for a genuine performance detail, the BLVD-LPF real carbon fiber frame stands apart from printed imitations. Whichever you choose, keep the border slim, keep every character and sticker visible, and confirm the rules where you drive.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best License Plate Frames for Cars SUVs and…Check price on Amazon