Key takeaways
- Five socket sets for the home garage, compared by drive size, piece count and case. Find the right coverage for your fasteners before you buy.
- Top Pick: DEWALT DWMT73804 34-Piece Socket Set
- Runner-up: GEARWRENCH 84916N 44-Piece Impact Socket Set
- Also consider: CRAFTSMAN 299-Piece Mechanics Tool Set
A socket set earns its place in a home garage the moment a bolt sits where a spanner cannot reach. The right set covers the fasteners on the vehicles in the driveway, carries the extensions the job needs, and stays organized in a case that survives being carried from the bench to the car.
This guide compares five socket sets by drive size, piece count, socket range and storage, using only what each listing states. Every set below is a real listing with a real ASIN, and every figure in the Specs lists comes from that product’s own listing record.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most home garages, the DEWALT DWMT73804 34-piece set covers everyday SAE and metric work in two drive sizes with a 72-tooth ratchet. The Amazon Basics 46-piece set adds deep and shallow coverage in one 3/8-inch drive case, while the CRAFTSMAN 299-piece set suits a garage that wants one large kit. Impact work calls for the GEARWRENCH 84916N set.
How to choose
Begin with the fasteners on your own vehicles. Most home cars mix metric bolts with a few SAE sizes, so a set that covers both systems in the sizes your cars actually use beats a larger set that skips the sizes you need. Check the vehicle maker’s manual for fastener sizes and torque figures, since those figures govern the work and never come from a tool listing.
Drive size shapes what a set can do. A 1/4-inch drive suits small fasteners in tight places, a 3/8-inch drive covers most general garage work, and a 1/2-inch drive suits larger bolts that need more leverage. A set with two or three drive sizes covers more jobs, but each added drive size adds weight and bulk to the case.
Count the sockets, then count the sizes that matter. A high piece count can hide many duplicates or bits you will never use, while a modest set with the right sizes does more real work. Shallow sockets suit fasteners that sit flush, and deep sockets reach nuts on long studs. A 6-point socket grips the flat sides of a hex fastener, and a 12-point socket turns more easily in tight places where the ratchet swing is short.
Look at the ratchet before anything else. A 72-tooth ratchet needs only a small swing to move the fastener, which matters under a dashboard or behind an engine. Check whether the set includes extension bars, since a short extension often makes the difference between reaching a bolt and removing half the parts around it.
Think about storage as part of the tool. A case that holds each piece in a labeled slot keeps the set complete and makes a missing socket obvious at a glance. A case with interlocking hinges or a removable tray can join a growing collection, while a simple molded case keeps the set portable.
Finally, match the set to the work you actually plan to do. Routine jobs such as oil changes, battery swaps and interior trim suit a general set. Safety-critical work on brakes, steering and suspension belongs with a qualified mechanic for anyone unsure, and no socket set changes that. Wear eye protection as one layer of care whenever you work under a vehicle, keep the work area clear, and never force a socket that slips on a fastener, since a slipping socket rounds the corners and turns a simple job into a long one.
DEWALT DWMT73804 34-Piece Socket Set
The DEWALT DWMT73804 is a compact 34-piece set that covers everyday garage work in two drive sizes. It pairs 1/4-inch and 3/8-inch drives with SAE and metric sockets, so one case handles the small fasteners inside the cabin and the larger bolts under the hood. The 72-tooth ratchet moves the fastener with a short swing, which helps in tight places where a full handle turn will not fit.
The set suits a home garage that wants one tidy case for routine jobs. Its removable inner tray fits most tool chests, and the side hinges interlock with similar DEWALT mechanics tool sets, so the case can join a growing collection. Hard-stamped markings on the SAE and metric sockets and wrenches make the right size easy to find.
Specs
– 34 pieces
– 1/4-inch and 3/8-inch drive
– SAE and metric sockets
– 72-tooth ratchet
– Chrome vanadium steel
– Hard-stamped size markings
– Removable inner tray
– Side hinges interlock with similar DEWALT mechanics tool sets
– Case length: 15.2 inches
GEARWRENCH 84916N 44-Piece Impact Socket Set
The GEARWRENCH 84916N is a 44-piece impact socket set built around a 3/8-inch drive. It holds standard and deep sockets in both SAE and metric sizes, so one set covers the fasteners that sit flush and the nuts that ride on long studs. The 6-point form grips the flat sides of a hex fastener, which suits the repeated force of impact work.
This set is listed as an impact set for use with impact wrenches, which makes it a natural second set for a garage that already owns a general hand set and wants matching impact coverage for stubborn bolts. Keep impact sockets with the impact wrench and hand sockets with the hand ratchet, since each form is made for its own kind of force.
Specs
– 44 pieces
– 3/8-inch drive
– 6-point sockets
– Standard and deep sockets
– SAE and metric sizes
– Impact socket set
CRAFTSMAN 299-Piece Mechanics Tool Set
The CRAFTSMAN 299-piece set is the large kit in this guide, built for a garage that wants one box to cover many jobs. It spans 1/4-inch, 3/8-inch and 1/2-inch drives, so small interior fasteners and larger underbody bolts both find a socket in the same case. The piece count comes from a wide spread of sockets and bits rather than from a few sizes repeated many times.
Inside the case sit 90 deep hand sockets and 125 shallow hand sockets, plus 41 hex bit sockets, 32 Torx bit sockets, 7 slotted bit sockets and 4 Phillips bit sockets. That range covers hex fasteners, Torx fasteners and common bit-driven screws in one place, which suits a garage that works on more than one vehicle.
A set this large suits a driver who wants to stop buying one socket at a time and keep a broad collection organized in a single case. Keep the case closed and latched when it is not in use, and return each piece to its slot after every job, since a large set only stays useful while it stays complete.
Specs
– 299 pieces
– 1/4-inch, 3/8-inch and 1/2-inch drives
– 90 deep hand sockets
– 125 shallow hand sockets
– 41 hex bit sockets
– 32 Torx bit sockets
– 7 slotted bit sockets
– 4 Phillips bit sockets
Amazon Basics 46-Piece 3/8-Inch Drive Socket Set
The Amazon Basics 46-piece set is a focused 3/8-inch drive kit with shallow and deep sockets in one case. It covers SAE and metric sizes in both 6-point and 12-point forms, so a fastener that needs a firm grip and a fastener that needs a quick turn in a tight place both find a match. The 72-teeth reversible ratchet swings in a short arc, which helps under a dashboard or behind an engine where space is short.
The set suits a home garage that wants deep coverage without a large case. Deep sockets reach nuts on long studs, shallow sockets suit fasteners that sit flush, and the mix in one case means fewer swaps mid-job. At 46 pieces, this set sits between a compact kit and a large master set, and the case measures 13.1 by 9.7 by 3 inches.
Specs
– 46 pieces
– 3/8-inch drive
– 6-point and 12-point shallow and deep sockets
– SAE and metric sizes
– 72-teeth reversible ratchet
– Chrome molybdenum steel
– Black phosphate finish
– Carrying case included
– Case size: 13.1 x 9.7 x 3 inches
GEARWRENCH 121-Piece Mechanics Tool Set
The GEARWRENCH 121-piece set adds a second drive size and a wider spread of pieces to the mid-range of this guide. It covers 1/4-inch and 3/8-inch drives in SAE and metric sizes, with 72-tooth ratchets that move fasteners with a short swing in tight places.
The set suits a driver who has outgrown a compact kit and wants broader coverage in one case. Two drive sizes mean the small fasteners inside the cabin and the larger bolts under the hood both have a matching ratchet close at hand. Return each piece to its place after every job, and check the case latches before carrying it across the garage.
Specs
– 121 pieces
– 1/4-inch and 3/8-inch drive
– 72-tooth ratchets
– SAE and metric sizes
Who should skip
Skip a large master set if your garage work is limited to one car and a handful of routine jobs, since a compact set covers those jobs with less weight and less shelf space. Skip an impact socket set if you own no impact wrench, since impact sockets belong with impact tools and add little to a hand-ratchet kit. Skip a single-drive set if your vehicles mix small interior fasteners with larger underbody bolts, since one drive size will leave gaps. Skip any set whose socket range misses the sizes your own cars use, no matter how high the piece count reads.
FAQ
How do I know which drive size I need?
Match the drive size to the fastener and the space around it. A 1/4-inch drive suits small fasteners in tight places, a 3/8-inch drive covers most general garage work, and a 1/2-inch drive suits larger bolts that need more leverage.
What is the difference between shallow and deep sockets?
A shallow socket suits a fastener that sits flush against a surface, while a deep socket reaches a nut that rides on a long stud or bolt. A set with both forms covers more of the car without extra trips to the bench.
Can I use impact sockets with a hand ratchet?
Impact sockets fit a hand ratchet of the same drive size, but they are built for impact wrenches and their thicker walls can limit access in very tight places. Keep impact sockets with the impact wrench where possible.
How should I keep a socket set complete?
Return each piece to its slot after every job and count the set before closing the case. A labeled slot makes a missing socket obvious at a glance. Store the case closed and latched on a dry shelf.
Final verdict
The DEWALT DWMT73804 is the pick for most home garages, with two drive sizes, SAE and metric coverage, and a 72-tooth ratchet in a compact case. The Amazon Basics 46-piece set is the pick for drivers who want shallow and deep coverage in a single 3/8-inch drive kit. The CRAFTSMAN 299-piece set suits a garage that wants one large kit for many vehicles and many jobs. The GEARWRENCH 84916N impact set belongs with an impact wrench, and the GEARWRENCH 121-piece set adds a second drive size and wider coverage for drivers who have outgrown a compact kit. Whichever set you choose, match its socket range to the fasteners on your own cars, follow the vehicle maker’s manual for torque figures, and leave safety-critical work to a qualified mechanic when you are unsure.
- Best Floor Jacks for Home Garage Car Work and Lifting
- Best Tire Pressure Gauges for Cars and Home Garages
- Best Car Ramps for Oil Changes and Home Maintenance
- Best Tire Repair Kits for Temporary Roadside Fixes
- Best Steering Wheel Locks for Cars, Trucks and SUVs
- Best Tire Pressure Monitoring Systems for Cars and Trucks




