Key takeaways
- Dorman 926-157 power steering pump O-ring kit review: two nitrile O-rings for select Acura and Honda models, with fitment and OE cross-references.
On many Honda and Acura models from the 1990s and 2000s, the first sign of power steering trouble is not a failed pump but a pair of tired rubber seals. The O-rings where the inlet and outlet lines meet the pump body harden with age and heat cycles, and the result is fluid weeping around the pump, a reservoir that keeps dropping, and the familiar pump whine that comes from air being drawn in on the suction side. The Dorman 926-157 Power Steering Pump O-Ring Kit is built to address exactly those two joints.
The kit contains two nitrile rubber O-rings sized as direct replacements for the original seals, cross-referencing the Honda OE numbers 91345-RDA-A01, 91370-SV4-000, and 91345-PDA-E01, and Dorman’s listing covers Acura and Honda applications built between 1994 and 2013. This review covers the published specifications, the fitment list, who this small kit suits, and who should plan a different repair instead.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The Dorman 926-157 is a two-piece nitrile rubber O-ring kit that replaces the hardened inlet and outlet seals on the power steering pumps of select Acura and Honda models built from 1994 to 2013. It cross-references three Honda OE numbers and carries a limited lifetime warranty. Owners of other makes, or leaks beyond the pump line joints, should skip it.
Key Specs
| Specification | Detail |
|---|---|
| Brand | Dorman |
| Manufacturer | Dorman Products |
| Part number | 926-157 |
| Product type | Power steering pump O-ring kit |
| Set name (as listed) | Power Steering Line O-Ring Kit |
| Contents | 2 O-rings |
| Material | Nitrile rubber |
| Color | Black |
| Item diameter | 14.5 millimeters (as listed) |
| Temperature rating | 120 degrees Celsius (as listed) |
| Item weight | 0.01 ounces (as listed) |
| UPC | 037495919708 |
| Honda OE cross-reference | 91345-RDA-A01, 91370-SV4-000, 91345-PDA-E01 |
| Warranty | Limited lifetime |
| Individual sizes of both rings | not stated |
| Package dimensions | not stated |
| Country of origin | not stated |
Two notes on the table. The listing publishes a single item diameter of 14.5 millimeters without breaking out each ring’s dimensions, so the second ring’s size is recorded as not stated rather than guessed. The listing also advises buyers to confirm their vehicle trim in the fitment tool before ordering.
Who It’s For
This kit is for owners of the Acura and Honda models named in the listing who have a leak, seepage, or air-ingestion noise traced to the power steering pump line joints. The Acura applications are the CL (1997 to 1999 and 2001 to 2003), Integra (1998 to 2001), MDX (2001 to 2013), RDX (2007 to 2012), RL (1998 to 2008), RSX (2002 to 2006), TL (1998 to 2008), and TSX (2004 to 2008). The Honda applications are the Accord (1994 to 2007), Civic (1996 to 2011), CR-V (1997 to 2011), Element (2003 to 2011), Odyssey (1995 to 2010), Pilot (2003 to 2008), Prelude (1997 to 2001), and Ridgeline (2006 to 2011).
It also suits anyone replacing or resealing a pump on one of these vehicles for another reason: O-rings that have heat-cycled for years rarely seal well a second time once the fittings are disturbed, so renewing both while the lines are off is sound practice. Shops will also appreciate the cross-reference to known Honda OE numbers, which makes confirming the part simple.
Who Should Skip It
Owners of vehicles outside the listed Acura and Honda applications should pass, because power steering pump fittings and seal sizes differ across makes and even across Honda generations. Drivers of later models with electric power steering have no hydraulic pump and no use for this kit at all. Anyone whose leak comes from a cracked hose, a failing rack, or the pump shaft seal should also look elsewhere: this kit contains only the two line-joint O-rings, so it cannot repair leaks at other points in the system. Finally, if the pump itself is worn internally and noisy even with a sealed inlet, fresh O-rings will not restore it, and a pump replacement or full reseal is the more appropriate job.
How It Compares
The typical alternatives fall into four groups. Genuine Honda O-rings, bought individually under the OE part numbers, do the same sealing job and are the reference standard for fit, but they are sold one ring at a time rather than as a matched pair. Generic O-ring assortment boxes cover hundreds of sizes for general workshop use, yet the exact dimension and compound for a given pump joint may not be among them, and a near-fit ring can seep or draw air. Complete pump reseal kits go further, adding shaft seals and housing gaskets; that suits a full pump rebuild but is more than a joint leak requires. Replacing the entire pump addresses worn internals, but it is a large step when the only fault is two hardened rings.
Against those options, the 926-157 competes on specificity and simplicity. Both rings for the two pump joints arrive in one package, sized for the listed applications and made from nitrile rubber, the material the listing specifies for this service. Buyers should weigh a vehicle-specific, cross-referenced kit against the flexibility of an assortment or the completeness of a rebuild set, and confirm the OE number of the seals coming off the vehicle before choosing.
Frequently Asked Questions
Which vehicles does the Dorman 926-157 fit?
According to the listing, it fits select Acura models (CL, Integra, MDX, RDX, RL, RSX, TL, and TSX) and Honda models (Accord, Civic, CR-V, Element, Odyssey, Pilot, Prelude, and Ridgeline) built between 1994 and 2013, with the exact year ranges varying by model. Because coverage depends on the specific application, confirm your year and trim in the fitment tool before ordering.
What is included in the kit?
The listing states the kit contains two O-rings, one for each of the power steering pump line joints it is designed to reseal. No hoses, clamps, fittings, or fluid are listed among the included components, so plan on reusing the existing hardware and supplying the correct power steering fluid separately.
Which original part numbers does it replace?
The kit cross-references the Honda OE numbers 91345-RDA-A01, 91370-SV4-000, and 91345-PDA-E01. Matching one of those numbers against the seal specified for your vehicle is the most reliable way to confirm the kit is right before taking the fittings apart.
Can new O-rings quiet a whining power steering pump?
They can when the whine is caused by air being drawn past a hardened inlet O-ring, a common failure pattern on the listed vehicles. Resealing the joint stops the air ingestion and the noise. If the pump internals are worn, or the noise comes from another component, the kit will not address it, so diagnose the noise source first.
Final Verdict
The Dorman 926-157 Power Steering Pump O-Ring Kit is a narrow, purpose-built repair part: two nitrile rubber O-rings, cross-referenced to three Honda OE numbers, covering a long list of Acura and Honda models from 1994 to 2013, and backed by a limited lifetime warranty. Its one job is resealing the pump inlet and outlet joints where age-hardened rings cause leaks and air ingestion. If your vehicle is on the fitment list and the symptoms point to those joints, this kit is the focused fix. If your car is not listed, or the leak lives somewhere else in the steering system, put the effort into the part that actually matches the fault.