Updated Nov 19, 2026· 5 min read

Key takeaways

  • The Dorman 901-301 fuel tank selector switch replaces the worn dash rocker on dual-tank Ford trucks. Check specs, fitment, and who should buy it.

Dual-tank Ford trucks from the early and mid 1990s rely on a small dash-mounted rocker switch to decide which fuel tank feeds the engine and which sending unit drives the fuel gauge. When that switch wears out, the symptoms are frustrating: the gauge reads the wrong tank, the truck draws from one tank no matter what the rocker says, or switching between tanks becomes intermittent. The Dorman 901-301 Fuel Tank Selector Switch is a direct replacement for that factory rocker, built to restore normal front and rear tank selection without rewiring the dash.

Dorman designed the 901-301 as an OE-style replacement rather than a universal toggle. It carries the same two-position rocker format as the original switch, mounts in the factory panel opening, and connects to the stock harness, so the repair is a swap instead of a fabrication project. This review covers the published specifications, the Ford applications it fits, who should buy it, and who should look elsewhere.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

The Dorman 901-301 is a two-position rocker switch that replaces the factory fuel tank selector on select dual-tank Ford trucks. It is panel mounted, rated at 20 amps, and cross-references the Ford OE number F2TZ 9A050-A. Owners of single-tank trucks, or trucks outside the listed Ford applications, should skip it.

Key Specs

Specification Detail
Brand Dorman
Part number 901-301
Product type Fuel tank selector switch
Switch type Rocker
Operation mode ON-OFF
Number of positions 2
Circuit type 2-way
Contact type Normally open
Contact material Metal
Current rating 20 amps
Operating voltage not stated
Mounting type Panel mount
Terminal type Blade
Color Black
Listed dimensions 3 x 3 x 3 inches
Weight not stated
Ford OE interchange F2TZ 9A050-A
Other interchange numbers DS-2268, SW6445, S41253
Warranty not stated

Who It’s For

This switch is for owners of dual-tank Ford trucks from the 1992 to 1997 era, including F-150, F-250, F-350, and F Super Duty models covered by the Ford OE number F2TZ 9A050-A. On these trucks, one rocker press selects the front tank and the other selects the rear tank, and the same switch routes the matching sending unit signal to the fuel gauge. If the original rocker is cracked, loose, electrically worn, or only works when held at an angle, a direct-fit replacement like the 901-301 is the straightforward fix.

It also suits restorers and work-truck owners who want the dash to keep its factory look. Because the 901-301 follows the original rocker format with front and rear markings, it blends into the panel instead of leaving a generic aftermarket toggle sticking out of a drilled hole. Fleet maintainers keeping older Ford dual-tank trucks in service will appreciate that the part cross-references a known OE number, which makes ordering and stocking simpler.

Who should skip it: owners of single-tank trucks have no selector circuit for this switch to control. Owners of Ford trucks outside the 1992 to 1997 dual-tank applications should also pass, because selector switch wiring and internal connections changed across generations, and a switch that physically plugs in is not guaranteed to switch correctly. Anyone whose problem is actually a failed selector valve, a dead in-tank pump, or a faulty sending unit should diagnose those parts first, since a new dash switch cannot repair them. Finally, anyone planning a custom dual-tank conversion on a non-Ford vehicle will be better served by a universal switch and valve kit designed for conversions.

How It Compares

Typical replacement selector switches fall into three groups. Factory-style direct replacements, the group the Dorman 901-301 belongs to, copy the original rocker shape, connector, and switching logic, so installation is a plug-in swap and the dash keeps its stock appearance. Universal toggle switches are the flexible option: they can be wired into almost any dual-tank setup, but they usually need a drilled mounting hole, manual wiring, and handwritten labels for the tank positions. Salvaged original switches from donor trucks match the factory part exactly, yet their contacts have the same decades of wear as the switch being replaced, so reliability is a gamble.

Against those alternatives, the 901-301 competes on fit and convenience rather than extra features. It offers the two positions a dual-tank truck needs and nothing more, which is appropriate for a switch that only routes power and gauge signals. Buyers comparing options should weigh how much they value a factory-correct connector and rocker markings against the lower effort of a universal toggle, and should confirm that any candidate switch matches the OE number of the one coming out of the dash.

Frequently Asked Questions

Which Ford trucks does the Dorman 901-301 fit?

It fits select Ford models covered by OE number F2TZ 9A050-A, which corresponds to dual-tank F-150, F-250, F-350, and F Super Duty trucks from the 1992 to 1997 period. Fitment depends on the exact year, model, and tank configuration, so confirm the application against the vehicle before ordering.

Does this switch also replace the fuel selector valve?

No. The 901-301 is the dash-mounted electrical switch only. The selector valve is a separate component in the fuel lines, and on later dual-tank trucks the switching is handled by the in-tank pump modules. A faulty valve or pump will not be fixed by replacing the dash switch.

What are the common signs that the selector switch has failed?

Typical signs include the fuel gauge showing the level of the wrong tank, the engine drawing fuel from one tank regardless of the rocker position, intermittent switching, or a rocker that feels loose or no longer clicks positively into each position. Testing the switch contacts with a multimeter helps confirm the diagnosis before replacement.

Is installation a plug-in job?

On trucks within the listed applications, the switch is designed as a direct replacement that panel mounts in the factory opening and connects to the stock harness with blade terminals, so no cutting or splicing should be required. Access usually involves removing the dash trim panel around the switch.

Final Verdict

The Dorman 901-301 Fuel Tank Selector Switch is a focused, factory-style repair part: a two-position, 20 amp rocker that restores front and rear tank selection on the dual-tank Ford trucks it was built for. It does not add features, and it does not pretend to fit everything, which is exactly the right approach for an OE replacement. If your 1992 to 1997 dual-tank Ford needs a new selector switch and the OE number matches, this is a sensible, low-effort fix. If your truck falls outside those applications, or the real fault sits in the valve, pump, or sending unit, spend the diagnostic time there instead.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Dorman 901-301 Fuel Tank Selector Switch Review for…Check price on Amazon