Key takeaways
- Compare five car ramps for home oil changes, from low-profile foam ramps to heavy steel pairs, with lift heights, load figures and setup guidance.
A pair of car ramps lifts the front end of a vehicle enough to reach the drain plug, the oil filter and the underside, all without a floor jack. For a home oil change, the setup is simple: drive up slowly, chock the wheels, set the parking brake, and the vehicle sits at a comfortable working height. Pick ramps whose listed load figure covers the vehicle and whose approach angle suits its clearance.
This guide covers five ramps sold on Amazon.com, from low-profile foam ramps built for lowered sports cars to heavy steel pairs and long plastic ramps made for trucks and SUVs. Every figure below comes from that product’s own listing record, and each is a ceiling to respect. A ramp only helps on flat hard ground, with chocked wheels and a second layer of support per the maker’s directions.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most home oil changes, the FloTool RhinoRamp 11909ABMI is the easy pick, with a listed 12,000 lb gross vehicle weight figure covering most cars, trucks and SUVs. Low-clearance sports cars fit the Race Ramps RR-30, with a gentle approach and a 5 inch lift. Match the listed load figure to the vehicle, use flat hard level ground, chock the wheels, and follow the maker’s setup before going underneath.
How to choose
Load figure comes first. Find the vehicle’s gross vehicle weight figure on the door jamb label, then compare it with the figure on the ramp listing. The listed figure is a ceiling: the vehicle must sit within it, never above it. When the numbers are close, move up to a heavier ramp. A pair figure and a per-ramp figure differ, so confirm which one the listing states.
Lift height comes next. A lift of 5 to 6 inches suits many oil changes, while 8 inches gives more elbow room for a larger drain pan. A gentle angle, around 10 to 17 degrees, lets a low-clearance car climb without the front bumper touching the ramp. Check tire width too: a tire wider than the platform will not sit squarely.
Material shapes the rest. Plastic ramps are light to carry and easy to store, steel ramps feel solid and last for years with basic care, and foam ramps are very light with a gentle approach for low cars. Finally, plan the setup: flat hard level ground, parking brake on, wheels chocked, a spotter guiding the climb, and a second layer of support as the maker directs.
FloTool RhinoRamp 11909ABMI
The RhinoRamp 11909ABMI is a familiar sight in home garages, and its listing figures explain why. A listed 12,000 lb gross vehicle weight figure covers most cars, trucks, SUVs and vans, so one pair serves a household with more than one vehicle. The 17 degree incline suits low-clearance vehicles, letting the front end climb without scraping, and the extra-wide stance gives the tire a broad platform. The CoreTRAC non-skid base helps the ramp stay put on a hard floor while the tire rolls up.
Plastic construction keeps the pair light enough to carry by hand, and the ramps nest together for storage. The lift gives room for a drain pan under the plug and a hand at the filter. Check the vehicle’s gross vehicle weight figure against the 12,000 lb listing figure and confirm the tire width fits the extra-wide platform.
Specs
– Listed load figure: 12,000 lb gross vehicle weight
– Material: Plastic
– Approach angle: 17 degrees
– Base: CoreTRAC non-skid base
– Design: Extra-wide, nestable pair
– Model number: 11909ABMI
– Brand: FloTool, manufacturer RhinoGear
RhinoGear RhinoRamps MAX 11912ABMI
The RhinoRamps MAX 11912ABMI takes the same plastic ramp shape and raises the listed load figure to 16,000 lb gross vehicle weight, for heavier trucks and large SUVs. The 17 degree incline stays gentle, so low-clearance vehicles can still climb. The extra-wide design gives a broad platform for wide tires, and the non-skid base helps the ramps hold their place on a hard floor during the climb.
For a household with a full-size truck or a large SUV, the extra headroom in the load figure is the point. The plastic build stays light to carry and nests for storage. Pick the MAX pair when the vehicle’s gross vehicle weight figure runs high, or when one pair must serve both a car and a heavy truck.
Specs
– Listed load figure: 16,000 lb gross vehicle weight
– Material: Plastic
– Approach angle: 17 degrees
– Base: Non-skid base
– Design: Extra-wide, nestable pair
– Model number: 11912ABMI
– Brand: RhinoGear
BISupply Vehicle Service Ramp Set 6.6in
The BISupply Vehicle Service Ramp Set is the long ramp in this guide. At 47 inches long, with a 6.6 inch lift, the pair gives a gradual climb that suits vehicles which cannot take a short steep ramp. The listing names a 10,000 lb load capacity for cars, pickups, SUVs and vans. The width of 11.3 inches fits extra-wide tires, so a truck tire sits squarely on the platform rather than hanging over the edge.
Non-slip pads on the base help the ramps stay in place while the tire rolls up, and a dotted grid design on the surface gives the tire grip on the climb. Pick this set when the vehicle needs a long gentle approach, or when wide tires rule out narrower ramps.
Specs
– Listed load capacity: 10,000 lb
– Lift height: 6.6 in
– Dimensions: 47 in long by 11.3 in wide by 6.6 in high
– Material: Plastic
– Ramp weight: 19.5 lb each
– Base: Non-slip pads, dotted grid surface
– Pack: 2 ramps
– Manufacturer part number: 0777
– Brand: BISupply
Nicky Nice Solid Steel Auto Ramp Set
The Nicky Nice Solid Steel Auto Ramp Set is the metal option in this guide, built from heavy-gauge stamped steel with a powder-coat finish. The listing gives a 6,500 lb gross vehicle weight figure, which covers most cars and light trucks, and the pair lifts the vehicle 8 inches. Raised side ribs and punched traction holes help the tire grip on the climb. At 35 inches long and 9 inches wide, the pair stores flat against a garage wall.
The ramps do not flex under the tire, they hold their shape year after year, and the powder-coat finish helps the surface stand up to garage damp and road grime. The 8 inch lift gives more room under the vehicle. Note that capacity figures for this product vary between listings, so read the figure printed on the ramps and in the instructions for the exact set received, and let that figure govern the choice.
Specs
– Listed load figure: 6,500 lb gross vehicle weight
– Lift height: 8 in
– Dimensions: 35 in long by 9 in wide
– Material: Solid steel, powder-coat finish
– Features: Raised safety ribs, punched traction holes
– Pack: 2 ramps
– Model number: 612944
– Brand: Nicky Nice
Race Ramps RR-30 Rally Ramp
The Race Ramps RR-30 Rally Ramp is the low-profile specialist in this guide, made for low-clearance vehicles that cannot climb a steep ramp. The pair is 30 inches long, gives a 5 inch lift, and uses a 16 degree angle of approach, so a low front bumper clears the ramp. Each ramp holds up to 1,500 lb, for a total vehicle weight capacity of 6,000 lb, and the pair fits tires up to 8 inches wide. The ramps are made from solid high-density foam with a rugged anti-slip coating.
One person carries the pair with one hand, positions them without dragging, and stores them on a shelf when the job is done. The foam spreads the vehicle’s weight across each ramp, and the anti-slip coating helps the tire grip. The 5 inch lift suits oil changes and light service on low cars, where a taller ramp would never fit. Pick the RR-30 when the vehicle sits low and the approach angle matters more than lift height.
Specs
– Listed load figure: 1,500 lb per ramp, 6,000 lb total vehicle weight
– Lift height: 5 in
– Length: 30 in
– Material: High-density foam with anti-slip coating
– Approach angle: 16 degrees
– Maximum tire width: 8 in
– Ramp weight: 4 lb each
– Pack: 2 ramps
– Model number: RR-30
– Brand: Race Ramps
Who should skip
Skip ramps altogether when the vehicle’s gross vehicle weight figure sits above every listed figure in this guide, or when the tire width exceeds the platforms on offer. A heavier truck or a wide-tire vehicle needs a different class of equipment, and a professional shop is the sensible route. Skip ramps too when the only ground available is gravel, grass, dirt or a slope: ramps belong on flat hard level ground, and soft or uneven ground lets a ramp sink or shift under load. Anyone who feels unsure about driving up a ramp, about chocking wheels, or about working under a raised vehicle should leave the job to a professional.
FAQ
Can I work under a vehicle held only by ramps?
No. Ramps are one part of the setup, never the whole of it. Follow the maker’s full instructions, use wheel chocks and the parking brake, and add a second layer of support as the maker directs before going underneath. When in doubt, leave the job to a professional.
How do I match a ramp to my vehicle?
Read the vehicle’s gross vehicle weight figure from the door jamb label or the owner’s manual, then compare it with the figure on the ramp listing. The listed figure is a ceiling, and the vehicle must sit within it with room to spare. Also check tire width against the platform and the approach angle against the vehicle’s clearance.
What kind of ground works for ramps?
Flat, hard, level ground, such as a concrete driveway or a garage floor. Soft ground lets a ramp sink, a slope lets it shift, and a wet floor cuts grip. Sweep the surface clear, set the parking brake, chock the grounded wheels, and have a spotter guide the climb.
How do I handle used oil after the change?
Pour used oil into a sealed container made for the purpose, keep it upright and away from children and pets, and hand it in per local rules and the container label. Never pour oil on the ground, into a drain, or into household waste.
Final verdict
To cover several vehicles with one pair, the FloTool RhinoRamp 11909ABMI is the easy first pick, with a 12,000 lb listed figure, a gentle 17 degree climb and a light plastic build. Households with a heavy truck should look at the MAX 11912ABMI instead, while readers who prefer metal and a taller lift will like the Nicky Nice steel pair. The BISupply set suits wide tires and a long gentle approach, and the Race Ramps RR-30 is the right call for low sports cars. Whichever pair you choose, let the listed load figure, the tire width and the approach angle decide, and never skip the setup: flat hard ground, chocks, parking brake, spotter, and a second layer of support.
- Best Car Wash Mitts for Gentle Hand Washing at Home Picks
- Best Foam Cannons for Home Car Washing and Detailing Days
- Best Floor Jacks for Home Garage Car Work and Lifting
- Best Car Cleaning Kits for a Showroom Shine at Home
- Best Tire Repair Kits for Temporary Roadside Fixes
- Best Mechanic Socket Sets for Home Garages and Repairs