Key takeaways
- QiMox hood lift supports review for 2010-2015 Lexus RX350 and RX450h: OEM-fit pair, 20.2-inch extended length, steel build, fitment notes and verdict.
A hood that drifts down on its own is more than an annoyance on a 2010 to 2015 Lexus RX350 or RX450h. Weak factory gas struts make every oil check and battery job a two-handed balancing act, and a hood that will not stay up is a genuine safety problem in the engine bay. The QiMox 6755 hood lift supports are sold as a direct OEM-fit replacement pair for exactly these models, built to restore the original lift-and-hold behavior without modifying the vehicle.
This review looks at what the QiMox set includes, the dimensions and materials the brand publishes, and where a model-specific aftermarket strut pair makes sense compared with the other ways owners usually fix a sagging hood. Fitment is narrow by design, so the details below focus on whether these supports match your RX and what to expect from the swap.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The QiMox 6755 is a two-piece set of front hood lift supports made specifically for the 2010 to 2015 Lexus RX350 and RX450h. The brand lists a 20.2-inch extended length, Grade 45 high-carbon steel construction with multi-layer chrome plating, and a drill-free swap using the factory mounting points. For owners whose original struts have gone weak, it is a model-matched replacement rather than a universal part.
Key Specs
| Parameter | Detail |
|---|---|
| Brand | QiMox |
| Product type | Front hood lift supports (gas struts) |
| Vehicle fitment | Lexus RX350 and RX450h, 2010-2015 |
| Quantity in set | 2 supports |
| Model number | 6755 |
| Part number | K90-0043 |
| Interchange references | PM3269, SG229046, D96755, 534400W200, 534500E010 |
| Extended length | 20.2 inches |
| Compressed length | 12.18 inches |
| Material | Grade 45 high-carbon steel with multi-layer chrome plating (brand stated) |
| Color | Black |
| Operating temperature range | -40 to 110 degrees Fahrenheit (brand stated) |
| Cycle rating | 50,000 or more compression cycles (brand stated) |
| Installation | Drill-free, uses factory mounting points; brand states about 5 minutes |
| Package dimensions | 6.54 x 7.32 x 11.97 inches |
| Lift force | not stated |
| End fitting type | not stated |
| Item weight | not stated |
| Warranty | not stated |
Who It’s For
A good fit if you own a 2010 to 2015 Lexus RX350 or RX450h and the hood no longer rises smoothly or refuses to stay open on its own. Because the set includes both supports, it suits owners who want to replace the pair together, which is the approach the brand recommends for balanced lifting on both sides. It also fits DIY owners who prefer a bolt-on swap at the factory mounting points with no drilling, and drivers in cold or hot climates, since the brand rates the sealed hydraulic design for a wide temperature range.
Who should skip it: owners of any other vehicle or model year. These supports are dimensioned for one application only, and the 20.2-inch extended length and 12.18-inch compressed length will not transfer to other Lexus models or other brands. Skip this set if your hood problem is actually a bent hinge, damaged mounting bracket, or a latch fault, because new struts will not correct hardware damage. It is also the wrong purchase if you need liftgate or tailgate supports instead; this set is for the front hood only.
How It Compares
Against genuine dealer replacement struts, the QiMox pair follows the same basic formula: model-specific lengths, factory mounting points, and interchange references that cross to the original part numbers. Dealer parts carry the manufacturer’s own backing, while aftermarket sets like this one compete on availability and straightforward like-for-like dimensions. Against universal gas struts, the difference is fitment work. Universal struts require the buyer to match extended length, compressed length, and force rating manually, and a wrong force rating can make a hood fly up or barely lift. A model-matched set removes that measuring step because the dimensions are already chosen for the RX hood.
Compared with the other common workaround, propping the hood with a rod or clamp, any working strut pair is a clear step up in safety and convenience, since both hands stay free and the hood is held along its designed support points. Where this set sits in the aftermarket field comes down to its published specs: high-carbon steel construction, chrome plating for corrosion resistance, and a stated cycle rating, all of which are claims buyers can weigh against competing replacement brands that publish similar or fewer details.
Frequently Asked Questions
Which Lexus models do the QiMox 6755 supports fit?
The brand lists fitment for the Lexus RX350 and RX450h from the 2010 through 2015 model years only. They are front hood supports, not liftgate struts, and the brand does not list any other models or years as compatible.
Should both hood struts be replaced at the same time?
The set includes two supports, and the brand recommends replacing both sides together. Mixing one new strut with one worn strut can leave the hood lifting unevenly, since the two sides will not share the load equally.
How difficult is installation?
The brand describes the swap as drill-free, using the existing factory mounting points, and states an install time of about 5 minutes. The old struts unclip from their mounts and the new ones attach at the same points, so no modification to the hood or body is listed.
What part numbers do these supports replace?
QiMox lists interchange references PM3269, SG229046, and D96755, along with the Lexus OE numbers 534400W200 and 534500E010. Cross-checking one of these numbers against the struts removed from your vehicle is a practical way to confirm fitment before ordering.
Final Verdict
For a 2010 to 2015 RX350 or RX450h with a tired hood, the QiMox 6755 set covers the essentials of a replacement strut pair: exact model-year fitment, published extended and compressed lengths that match the application, steel construction with chrome plating, and a drill-free installation at the factory mounts. The brand’s temperature and cycle ratings are stated plainly, even if lift force and warranty terms are not. Owners outside that fitment window should look elsewhere, but RX drivers inside it get a purpose-sized pair rather than a universal gamble.